HERTZ PACKAGE OFFER OF THE MONTH
HERTZ HCP4 AMPLIFIER Normal Price £262
HERTZ ESK165L COMPONENT SPEAKERSNormal Price £169
HERTZ 12” SUBWOOFER Normal Price £110
and a HERTS POWER KIT inc RCA Pure copper
Normal price £69.00
Total at Normal Price Value £610.00
OUR SPECIAL PACKAGE PRICE JUST £399
Package includes:
HERTZ HCP4 AMPLIFIER
Output Power (RMS) @ 14.4 VDC, THD 1%:
» 4 Ch: 55 W x 4 (4 Ohms)
» 4 Ch: 85 W x 4 (2 Ohms)
» 3 Ch: 55 W x 2 (4 Ohms) + 170 W x 1 (4 Ohms)
» 3 Ch: 85 W x 2 (2 Ohms) + 170 W x 1 (4 Ohms)
» 2 Ch: 170 W x 2 (4 Ohms)
» Output Power (RMS) @ 14.4 VDC, THD 10%:
» 4 Ch: 65 W x 4 (4 Ohms)
» 4 Ch: 95 W x 4 (2 Ohms)
» 3 Ch: 65 W x 2 (4 Ohms) + 190 W x 1 (4 Ohms)
» 3 Ch: 95 W x 2 (2 Ohms) + 190 W x 1 (4 Ohms)
» 2 Ch: 190 W x 2 (4 Ohms)
HERTS ESK165 COMPONENT SPEAKERS
A simple upgrade to your OEM speakers. Extended frequency response and enhanced dispersion characteristic for more accurate stereo image and sound stage.
Component – Two way system
» Woofer size mm (in.) 165 (6.5)
» Tweeter diaphragm mm (in.) 26 (1)
» Power handling W peak 300
» W continuous 100
» Impedance 4Ohms
» Frequency response 60 Hz – 23kHz
» Sensitivity dB SPL 93.5
» Woofer magnet size D•d•h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.5)
» Tweeter magnet size D•d•h mm (in.) 19 x 3 (0.75 x 0.12)
» Woofer voice coil Ø mm (in.) 25 (1)
» Tweeter voice coil Ø mm (in.) 20 (0.8)
» Woofer magnet – High density flux ferrite
» Tweeter magnet – Neodymium
» Woofer cone – Water repellent pressed paper
» Tweeter dome – Tetolon
» Crossover type – LP/HP @ 3 kHz – 6/12 dB Oct.
» Component adjustment dB +2, 0, -2
» Woofer weight
» of one component kg (lb.) 0.96 (2.12)
» Tweeter weight
» of one component kg (lb.) 0.03 (0.07)
» Crossover weight
» of one component kg (lb.) 0.17 (0.37
HERTZ 12” DS30 (Dieci) subwoofer
12″ inch Hertz DIECI DS30 – 700W max power subwoofer
SPECIFICATION:
» High thermal dissipation and magnetic permeability plates, providing constant, even flux.
» Large double magnet, for perfect control under high power, high excursion conditions.
» Copper voice coil, wound on aluminium former, for startling thermal and mechanical capacity.
» Back plate vent holes, for very good thermal dissipation.
» Back Vented Spider support, for perfect symmetry under high excursion and thermal dissipation.
» Butyl rubber gasket provides ideal coupling to the mounting surface, damping basket resonance.
» Butyl rubber magnet ring provides protection against abrasions.
» Internally reinforced basket, protected from abrasions by high resistance paint.
» High current, tin-plated terminals.
» Silver plated silicone shielded lead wires for maximum reliability and conductivity.
» Basket and motor coupled and damped through special epoxy glue.
» Wide-wave, resin-bonded fibre spider for mechanical reliability and consistent parameters.
» High density Foam surround, for linear movement even under high excursion conditions.
» Water-repellent pressed paper cone.
» Max Power handling: 700W
» RMS Power handling: 350W
» Impedence: 4-ohm, single voice coil
» Frequency response: 25-250Hz
» Sensitivity: 91.6dB
» Outer diameter: 312mm
» Mounting diameter: 276mm
» Mounting depth: 128mm
All the above comes complete with a Audison power kit.
